10" hitch riser

garmp wrote:
I can see many new pandemic RVers getting disgruntled with all the "add on's" needed. We've been at this a bit now and still constantly adding or up grading something.
Tank sensors are next on our list. And it just keeps growing!!!

I agree.

As you know, we have owned our rig since new in 2007 and I still find little things to improve upon. It would make me crazy if it wasn't a hobby. One thing certain, the next owner will get one great old rig.

Should be getting our carrier this week or next. That's when we'll see just what kind, if any, riser will be needed. Hope not. Just one more thing to buy and carry about.
I can see many new pandemic RVers getting disgruntled with all the "add on's" needed. We've been at this a bit now and still constantly adding or up grading something.
Tank sensors are next on our list. And it just keeps growing!!!

ron.dittmer wrote:

Dusty R wrote:
I have a bicycle carrier that goes in the trailer hitch. Instead of a pin, it has a nut welded in the hitch and a bolt that screws/tightens into the carrier.

Are you certain it eliminates the play within the connection? I bolt my bike rack to my SUV, but the play remains.

I was using it on the front of our mh. Yes it held good. Never used just a pin only so hard to compare.

CA Traveler wrote:

ron.dittmer wrote:
I was surprised to read that you felt the Roadmaster Quiet Hitch was not effective. I use a riser with a Quiet Hitch at each connection as shown below. Once they are on, there is "zero play" in the system.

The Quite Hitch has served me well on the MH. With more limited hitch space on the cars it doesn't fit so I now use the following for $12 and the vice hitch is overpriced IMHO.

https://www.amazon.com/gp/product/B01N22S92X/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

I like what you have better. It does the same as the Quiet Hitch but at a fraction of the price, and seemingly more robust.

Dusty R wrote:
I have a bicycle carrier that goes in the trailer hitch. Instead of a pin, it has a nut welded in the hitch and a bolt that screws/tightens into the carrier.

Are you certain it eliminates the play within the connection? I bolt my bike rack to my SUV, but the play remains.

I do not have the bike carrier yet, should arrive the end of this month or early next. I need to try it with the larger ebike, we have 2, his & hers just to see if I have to raise it or not. Never thought of visibility of lights through the spokes. Knew I came here for a reason. Might need to raise it a bit just for ground clearance if nothing else, being extended from the body & all.
And the carrier I bought comes with a stabilizer, so if I do get a riser I'd only need one for that.
Thanks for all the good suggestions and such.

Stay safe.

I have a bicycle carrier that goes in the trailer hitch. Instead of a pin, it has a nut welded in the hitch and a bolt that screws/tightens into the carrier.

ron.dittmer wrote:
I was surprised to read that you felt the Roadmaster Quiet Hitch was not effective. I use a riser with a Quiet Hitch at each connection as shown below. Once they are on, there is "zero play" in the system.

The Quite Hitch has served me well on the MH. With more limited hitch space on the cars it doesn't fit so I now use the following for $12 and the vice hitch is overpriced IMHO.

https://www.amazon.com/gp/product/B01N22S92X/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Using a riser is fine if that's what you need. No real analysis needed.
Like mentioned though, bet you can see the lights just fine through the bike wheels.

IAMICHABOD wrote:

ron.dittmer wrote:
You mentioned using one hitch stabilizer. I would use one on each of the two connections to minimize or eliminate the thrashing of your E-bikes. Ron

As for the bouncing that others have talked about to make it less pronounced You need a good anti rattle device so you don't get so much play in the receiver,thus magnifying the movement and doing any damage to the bike rack and Bikes

I have tried almost every Anti Rattle device on the market, most have been no good or so complicated and cumbersome that they are useless. Including the Roadmaster type, or blue ox totally useless.

Until I found the one at Hitch Rider.

Their Hitch Vice is the best and easiest one I have come across and it really works.

That surely looks to be very easy to install. I like that!

I was surprised to read that you felt the Roadmaster Quiet Hitch was not effective. I use a riser with a Quiet Hitch at each connection as shown below. Once they are on, there is "zero play" in the system.

I like your recommendation specifically for the quick on/off feature. I leave mine attached all trip long which helps make the Quiet Hitch work.