Forum Discussion
tatest
Mar 20, 2014Explorer II
CDNSENIOR wrote:
What we were hoping to accomplish is to have both 30A & 15/20A(110) at our hookup at our campground & not have to run a separate 110 feed.We have tried to plug into the rv system but blow the circuit breakers every time.This set up was to be a separate line for an infra red heater.
If the load is too much for the 30A breaker in your RV, it will probably also be too much for the 30A breaker in the box.
If it is a branch circuit blowing, it might be better going all the way to the 20A in the box, because if it is a 50/30/20 RV box they usually take the 20 from the opposite leg of the 50 than that tapped for the 30.
About Motorhome Group
38,705 PostsLatest Activity: Jan 26, 2025