'93 Ford E350 - Master cylinder bore size?
Haven't posted here for a while, and I'm not sure anyone can help or not. I will check with some of the more mechanic oriented pages as well, but I think this is somewhat specific to my vehicle being...
Forum Discussion
I tried to find the FAX #24 and was unsuccessful. Please link that and let's have a looksee.
Looking at a link on that RWAL article, I got confirmation that some newer 4-wheel ABS systems have to be bled professionally. Or at least by somebody with a scan tool and power bleeder.
That's what our '02 chassis has. I think I'll stay with my "fluid replacement strategy" where I use a turkey baster do remove nearly all the fluid from the MC. Then fill with fresh and bleed all that out via the calipers. Then fill again.
Hope I don't have to replace an MC soon...
Looking at a link on that RWAL article, I got confirmation that some newer 4-wheel ABS systems have to be bled professionally. Or at least by somebody with a scan tool and power bleeder.
That's what our '02 chassis has. I think I'll stay with my "fluid replacement strategy" where I use a turkey baster do remove nearly all the fluid from the MC. Then fill with fresh and bleed all that out via the calipers. Then fill again.
Hope I don't have to replace an MC soon...
