95 Bounder 35() looking for list of bulbs
I have a recently acquired 95 Bounder 35(?). I’m trying to get all of the clearance lights and front blinker sets all working. I’m reasonably certain that I’m just dealing with burnt out bulbs, and ...
Forum Discussion
Your 95 Bounder 35(?) is actually a 35U. Unique design. Opera windows, "L" couch and 60 gallon water tank in the very rear compartment. Exhibit caution when loading. Running with the water tank full (500 lbs.) will over load the 11,000 lb. rear axle.
I suggest you use the 193 bulb for your marker/clearance lights.
193 draws 0.33 amps and the 194 bulb draws 0.56 amps. No need to generate excess heat on all that plastic.
Also, you interior lights are 1141 & 1142, depending on weather they are single or dual contact on the base. Do not replace those 1141 bulbs with 1156 bulbs or you will melt plastic. Same with the 1142, stay with the same part #. There are a few of us Bounder owners that have learn the hard way. GRIN
Better yet, think LEDs
Richard
I suggest you use the 193 bulb for your marker/clearance lights.
193 draws 0.33 amps and the 194 bulb draws 0.56 amps. No need to generate excess heat on all that plastic.
Also, you interior lights are 1141 & 1142, depending on weather they are single or dual contact on the base. Do not replace those 1141 bulbs with 1156 bulbs or you will melt plastic. Same with the 1142, stay with the same part #. There are a few of us Bounder owners that have learn the hard way. GRIN
Better yet, think LEDs
Richard
