Alignment settings goal review
I'm about to take my 24' E450 class C for it's second wheel alignment armed with more knowledge. Caster is currently set to 3.9, 4.2 degrees, I'll have it set to maximum achievable up to the specif...
Forum Discussion
My measurements on the OP are correct, it is at about 4 degrees positive caster, and about .6 degrees positive camber. It is 0 degrees toe in.
I'm trying to improve straight line minor corrections. This would be on flat roads, no wind where little or no other corrections would be needed. It currently needs slight zig zag corrections to keep it going straight. While any vehicle needs some of this (almost the definition of driving), I'd say my C needs a bit more than I'm used to.
I'm trying to improve straight line minor corrections. This would be on flat roads, no wind where little or no other corrections would be needed. It currently needs slight zig zag corrections to keep it going straight. While any vehicle needs some of this (almost the definition of driving), I'd say my C needs a bit more than I'm used to.
