Anyone interested in 83 Pace Arrow Tear down and Rebuild?

Here is a photo that I manipulated just to see what the end of the kitchen might look like if I added wallpaper to the passenger side of the cabinets.

It does what I thought it would do, which is to visually separate the kitchen and the living areas. It gives the illusion that the room I am in, ends right there.

Still don't know if I like it or not.

And now, it's time for my magic trick.

(Snaps fingers)!









It's amazing how long it takes sometimes to clean things up, and organize stuff that has been sitting for a while.

Yes, that's all I got accomplished today, although it took several hours to do.

Bill.Satellite wrote:

fulltimin wrote:
Look at this Mess!!!

Well, not really. The shelves are Gone! Yup. I removed all of my tools and goodies that were here, and moved them to the shelves in the kitchen area.

I then proceeded to dis-assemble the shelves I had made for this area. I had only screwed them together with Kreg screws, and did not use any glue, since I knew these would be temporary.

More cleanup of this area tomorrow.

OMG!

Thanks for the laugh! :)

fulltimin wrote:
Look at this Mess!!!

Well, not really. The shelves are Gone! Yup. I removed all of my tools and goodies that were here, and moved them to the shelves in the kitchen area.

I then proceeded to dis-assemble the shelves I had made for this area. I had only screwed them together with Kreg screws, and did not use any glue, since I knew these would be temporary.

More cleanup of this area tomorrow.

OMG!

As I was sitting in the moho today after moving my tools, I was looking at this.







As I was just looking at the rear of the coach, it dawned on me, that if I added some "stone" to the passenger side.....






Adding that to this side would kind of "visually" separate the kitchen and the living areas.

The more I looked at it, the more I kind of liked the idea.

I'll have to see if I have enough left over, or if I have to buy another roll.

What do ya think? Sound like a good idea?

What's that you say? You are convinced I have lost my mind? Well, I must have some company somewhere.......

I offered to build my wife a sink that would match the shape of the frying pan we have, plus just enough to allow a hand to get to the handle and remove the pan, but, alas, she said no. (sigh). Lol...

As such, I'll have to have one that matches roughly the size of this entire piece of plywood, so we can get the frying pan in the sink, plus some extras.

Here we go with more of those goodies on the drivers side, again with room to spare.

So, here are some of the goodies from the shelves in the front, with plenty of room to spare.

Look at this Mess!!!

Well, not really. The shelves are Gone! Yup. I removed all of my tools and goodies that were here, and moved them to the shelves in the kitchen area.

I then proceeded to dis-assemble the shelves I had made for this area. I had only screwed them together with Kreg screws, and did not use any glue, since I knew these would be temporary.

More cleanup of this area tomorrow.