Anyone interested in 83 Pace Arrow Tear down and Rebuild?

Day after Thanksgiving.

A day for removing Thanksgiving decorations, and putting up the Christmas decorations.

All that while watching "A White Christmas".

You know - that tradition stuff.

Bill.Satellite wrote:
Had a great one! Thanks
Cooked the Holiday turkey in a sous vide. LOL

Cool. ...

Had a great one! Thanks
Cooked the Holiday turkey in a sous vide. LOL

HAPPY THANKSGIVING, EVERYONE! HOPE YOU HAD A GOOD ONE.

JoeH wrote:

fulltimin wrote:
Anyone use a sous vide for cooking? Do you like it? Any words of wisdom in it's use?

In case you don't know what that is - Here is a link.


Click

I do it sometimes..... I made my own cooker using a crockpot and a temperature controller I got on ebay for a few bucks. Works good.
Many restaurants use sous vide

Thanks. I hadn't thought of that.

fulltimin wrote:
Anyone use a sous vide for cooking? Do you like it? Any words of wisdom in it's use?

In case you don't know what that is - Here is a link.


Click

I do it sometimes..... I made my own cooker using a crockpot and a temperature controller I got on ebay for a few bucks. Works good.
Many restaurants use sous vide

Anyone use a sous vide for cooking? Do you like it? Any words of wisdom in it's use?

In case you don't know what that is - Here is a link.


Click

I also got the door put back into place. I still need to add a sill plate at the bottom, for the door to be able to seal just a "little" better. Lol.







Yea, that's about it for today. I got interrupted a few times, and the wife said we need to go get a "slushy", so my time was limited. Lol.

It was a nice, sunny day, today.

Managed to get the scaffolding covered up today.

Lt46 wrote:
My guess is your bride found them in the washing machine. LOL

No. The rest of the screws were stuck in the wood. The threaded end was in the bottom half of the wood, and the head end was in the top half with the pocket hole, but no threads on that end to unscrew them.

If I want to re-use the blocks with the top half of the screw in them, I'll have to punch the screw out, until I can get hold of the head to pull it the rest of the way out. Not sure it's worth it.