Atwood G6A-4E hot water heater parts needed
I've been working on my hot water heater following the advice from people on the forum. The problem was that it decided to stop lighting. After cleaning all contacts, testing the ECO and stat, t...
Forum Discussion
Reporting back. Replaced the gas valve assembly and it fired up like a champ. Going to replace the spark assembly, ECO and Stat today to make it brand new.
Thanks to all for educating me.
I have a basic electronic question abouts ohms. So I tested the solenoids on the new gas valve and they both were 50 as was expected.
I tested the old solenoids and I got no continuity on one of them and 100 ohms on the other. No continuity means that the circuit is broken. What does 100 ohms tell you when it is supposed to be 50?
Thanks to all for educating me.
I have a basic electronic question abouts ohms. So I tested the solenoids on the new gas valve and they both were 50 as was expected.
I tested the old solenoids and I got no continuity on one of them and 100 ohms on the other. No continuity means that the circuit is broken. What does 100 ohms tell you when it is supposed to be 50?
