Auto gen start issue using Voltage setting
OK.we are dry camping with my wife's relatives in NJ...batteries are 8 month old Interstate GC2s Four of them....everything works but when the generator is cold over 4 hours of so and the auto gen is...
Forum Discussion
There is something in the manual about how long the voltage has to stay low (in your case 12.1 to 21.2)before it will start.The voltage has to stay low for a period of time so if your voltage drops to 12.2 for a couple of seconds because something drew a startup current this might not be long enough. This is in the manual so take a look. You might try auto gen start based on SOC and see if that helps.
