B+ motorhomes
I just bought a Trail Lite B+ 211s with 8.1 Chevy engine. This is my fifth motorhome (others range from an old 20' Vagabond, and three Winnegagos, from 19 to 32'. This vehicle is fantastic. I am...
Forum Discussion
Okay, we all knew they were made inexpensively. I have the Trail Lite 235S (side rear door with bath in the driverside rear corner). This design is much like the 225 in the rear. My slides for the bottom, rear, large kitchen drawer to the right of the microwave have failed. One screw pulled out of the back wall when the other broke. What seems to have broken is the plastic L shaped piece that supports the hardware slide and drawer by wrapping around the top, bottom and outside of the slide hardware. It was secured by one screw with a lot of air between the plastic and the wall. I plan to use some 1x2 inch moulding to beef up the support. The plastic support split separating most of the bottom foot from the side of the L.
Does anyone know if this plastic support is available on the open market? I found one web site but they want to sell it in a carton of 100 packs which includes the hardware slide.
Any help will, as always, be appreciated.
Does anyone know if this plastic support is available on the open market? I found one web site but they want to sell it in a carton of 100 packs which includes the hardware slide.
Any help will, as always, be appreciated.
