Best place in Wichita Kansas Area for E450 alignment

one more thing....after much reading on the forum, I've taken notes on the preferred setting of the front end alignment for the E-450 chassis.

Below is what I think I've gleaned from all the information:

Caster is key to good tracking, set to high positive end, no 0 or negative.
+5 Left, +5.5 Right
Camber should be "0" but never Negative
Toe In should be "0" to a 1/8" Toe In

Any thing I missed or I'm incoreect, please feel free to educate me more!

Thanks
Kelly