Coleman Mach 15 A/C & Generac NP50-G Genset
I installed a Coleman Mach 15 A/C as a second unit on my motor home. The rear A/C is wired to run from the 20 AMP breaker only from the generator (4800 Watts). The 30 AMP breaker connects to the tra...
Forum Discussion
naturist wrote:
I note that your wiring diagram is incomplete.
Here is my current plan:
Except for a few feet of wire, this is about an $85 project.
Transfer switch is: PowerMax PMTS-30 30 Amp Automatic Transfer Switch. Same as one already installed. I would jumper from the 30 AMP generator input connection on XFR switch one to the 30 AMP input on XFR switch two.
It did run and cycle several times on my house 20 AMP circuit connected with a 30 AMP 50' extension cord. No problems with breaker tripping.
