Forum Discussion
jplante4
Oct 04, 2018Explorer II
Gundog wrote:
Do you have any more pictures of the slobber tube Mod?

Here's the slobber tube as it came from the factory. You can see how much oil is on the end. The slip joint leads to the extension piping.

I went with 1-1/2 PVC, 1-1/4 would have worked as well. An 1-1/4 to 1-1/2 slip joint makes the connection.

Here's the far end. My temporary pipe hanger became permanent when the pipe hanger I bought for the job got used on the generator tailpipe.

About Motorhome Group
38,756 PostsLatest Activity: May 20, 2019