Forum Discussion
supercub
Jun 14, 2015Explorer
I have an old volt meter with a needle indicator. I just checked continuity between the poles on the fuse link. I place the pins from the meter on the lugs and the indictor jumps over to the right, indicting I have continuity. I reverse the positions of the pins and the needle buries itself to the left.
I did the same thing on the fuse link above it and the indictor on the meter goes to the right no matter what position I have the meter pins at.
I did the same thing on the fuse link above it and the indictor on the meter goes to the right no matter what position I have the meter pins at.
About Motorhome Group
38,763 PostsLatest Activity: Dec 26, 2025