Dometic Comfort Control 2 Thermostat issue
Dometic Comfort Control 2 model#3314080.xxx(without dehumidify) My zone 1(front AC/HP) HP mode seems to be stuck on HP/FURN it trys to start then it flashes HP then to FURN and will not run the heat...
Forum Discussion
I would first try a reset-
The system initialization shall be initiated with the thermostat turned “OFF” (Either a blank display or clock only
showing). Simultaneously press and hold the MODE and ZONE buttons. The LCD will display “IniT” and all available
zones. Release the MODE and ZONE buttons. Press the ON/OFF button to exit.
