Drop hitch
I have another dilemma based on my Itasca Suncruiser Operators Manual. It states: "When coupling the vehicle tow bar to the Factory Receiver Hitch using a 'drop receiver' or a conventional 'ball mou...
Forum Discussion
Seniorfirsttimer wrote:
I have another dilemma based on my Itasca Suncruiser Operators Manual. It states: "When coupling the vehicle tow bar to the Factory Receiver Hitch using a 'drop receiver' or a conventional 'ball mount' do not exceed a 4" drop...
It seems that with this restriction it would be impossible to tow almost any vehicle especially my 1965 VW Beetle. The height of the receiver opening on the coach is 27" off the ground. THat means that any tow bar would have to be 23" off the ground to be level. The front of my beetle is only 10" off the ground leaving me 13" to make up.
Any comments?
Wow they located your receiver awfully high. I can't imaging towing anything that you are not going to need to use a drop adapter. I have almost the same height difference to make up but in my case the car connection points are 27" and the coach is 17".
