I have a 2004 Winnabago Brave the rear a/c works, but the Display on the EMS monitor show zero current. Is this the way it works or is this a problem, what could cause this? it is a 30 amp and i am ru...
My experience with a 1999 Winnebago - 30 Amp. The rear (bedroom) A/C is not wired through the EMS or load shedder, therefore it does not show any amperage being used on the EMS panel. I would run both A/C units (both roof top) while on generator or plugged into a 30AMP RV outlet. If there is an overload, the EMS will shut things down that go through it, like the front A/C.