Forum Discussion
sailor_lou
Apr 07, 2013Explorer
Regarding:
"I plan to try and rig a stand to drop the jack on to with 4 X 6's and this will allow me to get the wrench under the jack and maybe the slight pressure on the rigged stand with keep the piston from turning."
That was my exact thought, I'd be interested in how that works out. I'd also run a tap into the threads first to clean them out as much as possible and check to see if the bolt is bottoming out. They do move about a little, but obviously shouldn't be flopping around. Good luck.
Lou
05 Travel Supreme Envoy
"I plan to try and rig a stand to drop the jack on to with 4 X 6's and this will allow me to get the wrench under the jack and maybe the slight pressure on the rigged stand with keep the piston from turning."
That was my exact thought, I'd be interested in how that works out. I'd also run a tap into the threads first to clean them out as much as possible and check to see if the bolt is bottoming out. They do move about a little, but obviously shouldn't be flopping around. Good luck.
Lou
05 Travel Supreme Envoy
About Motorhome Group
38,706 PostsLatest Activity: Dec 02, 2016