Forum Discussion
wolfe10
Aug 10, 2020Explorer
Unless very quality-driven, CASTER which has a significant effect on pulling to one side on solid front axle application requires dripping the side of the axle enough to install shims.
Less quality-driven techs are content with "just about OK".
Normally right side caster is 1/2 to 3/4 degree more than left to compensate for road crown.
http://www.truckcomponentsonline.com/TRUCK-CASTER-SHIMS_c_316.html
Less quality-driven techs are content with "just about OK".
Normally right side caster is 1/2 to 3/4 degree more than left to compensate for road crown.
http://www.truckcomponentsonline.com/TRUCK-CASTER-SHIMS_c_316.html
About Motorhome Group
38,707 PostsLatest Activity: Feb 28, 2025