Full wall slide adjustment
I have a 2012 Itasca Suncruiser with a full wall slide on the driver's side. It is a power gear system. When retracting the slide it is hitting the hinges on a bay door towards the rear of the coach a...
Forum Discussion
"dsisemore1".....First, park your coach on level ground with the slide in and check the paint job. See if the stripes line up horizontally or are they off some (slide is a bit lower). If so, extend the slide and look under the outer edge. At each slide arm, near the exterior wall there should be a vertical bolt that is double nutted. Loosen the locking nut and then adjust the bolt to lift the slide enough to correct the issue (probably a couple of terms.
