Furnace problems - 3 lights, any solution?
Hi, my Atwood 8535 IV does not want to keep going. It fires up, it blows, the burner comes on but as soon as the electrode stop clicking, the flame stops. It tries 3 times then I get a 3 shot flashing...
Forum Discussion
The circuit board tested OK, but you never know with these gizmo. The board is the most expensive part, over here in Canada, they sell for around 220 to 260 plus %15 taxe, what a ripoff. In the US, they sell for $94 but I have to pay custom, shipping plus 30% exchange rate, but still it is cheaper, comes to around 162.
I will try a new electrode and maybe a new regulator.
I will try a new electrode and maybe a new regulator.
