Forum Discussion

sssooo's avatar
sssooo
Explorer
Dec 03, 2020

Furnace

I have a 2018 fleetwood bounder the rear furnace quit working last year it did the same thing this year I replaced the borde last year and it worked ,now
I an looking at the board and it has a red dieod flashing it has a reset I pushed it did nothing?
I don’t have any noumbers to give you
  • The fan does not run it does not try to lite the red lite just flashes?
  • It is a Atwood I looked at the flashing light it has no pattern it just flash’s doesn’t have a pause
    I think it might beAFMD30
  • Brand/Model would be VERY helpful.
    Should be in paper work you got with the RV
    Data Sheet could be glued to inside cabinet door or in a drawer etc.
    Brand/Model would be on the Furnace


    Blinking Light is an ERROR Code
    How many times is the flashing....1x, 2x, 3x etc between pauses?

    At least it isn't solid RED...that would be a fault in circuit board

    Does the FAN Run?
    IF Fan does run does it try to light off.....Click, Click, Click of the spark electrode?

    Turning thermostat OFF then back ON should reset the Fault Light and allow for another attempt of furnace operating.

    Brand/Model
    Answers to questions