Fuse keeps blowing
The bedroom light fuse in our 2010 Tioga Ranger blows out immediately when I plug it in. This just started happening. Any ideas on the cause would be appreciated. Tom
Forum Discussion
Hope not, but somebody, on assembly, may have caught wiring under a screw or staple and it's just not chafed through the insulation.
But drop the fixture(s) down and see if situation changes.
I've used a low-amperage (say 10-AMP) auto-reset circuit breaker in place of the fuse. That gives me a chance to go around and manipulate the wiring and fixtures to see if the short "lifts."
But drop the fixture(s) down and see if situation changes.
I've used a low-amperage (say 10-AMP) auto-reset circuit breaker in place of the fuse. That gives me a chance to go around and manipulate the wiring and fixtures to see if the short "lifts."
