FWS Major Failure (see photos) *UPDATE*
Today I noticed the outside end cap to the Power Gear ram was getting hung up when retracting the full wall slide. Upon closer examination, it was discovered that two bolts that secure the floor to th...
Forum Discussion
Rut Ro , not what I wanted to hear! According to the tech who welded it, the head was welded to the frame, then he went around it again with a second weld. The original failure was most likely a result of the slide being out of alignment. Since it is now properly aligned, hopefully it will hold up, considering this was the center ram, and there are still two outside rams to share the load.
