generator/electrical problem
Having an issue with what I assume is my generator. I can run the generator and normally don't have any issues. I can run electronics, the microwave works, etc. However, when I try to run the AC, s...
Forum Discussion
enblethen wrote:
Unless I am reading the OP's second post he is trying to run shore power and genset at the same time. He says running in "the genset and AC in tandem". Some Transfer switches don't like this!
He states that he is not running both, just that on shore power both AC's have no problem. Only when Genset is running. As to your statement that some Transfer switches don't like BOTH Shore and genset. NOT TRUE. On Genset, IT will be in Genset mode. I have NEVER seen a conflict on an ATS when both Gen and Shore are connected. IF you have such a problem, your ATS is defective or miswired. The purpose of the ATS is to be able to have BOTH sources available without a conflict or problem. Doug
