HD View 360 Antenna System
We have a HD antenna model HDMS9100 that is giving us a ER code, we have check what the manual says to do but we still get the code. It started out that the antenna would not turn are pick up any stat...
Forum Discussion
Not sure if this helps - but the manual is here: http://manuals.solidsignal.com/HDMS9100_Manual.pdf
Problem: LCD displays Er
Possible Causes:
The position feedback wire (black) is not connected.
The coaxial cable is not connected.
The 3 control wires (red, black, blue) are reversed.
Possible Solutions:
Connect the wire*
Connect the cable*
Correct the wire connection*
* The receiver should be power reset after fixing the wire connection.
Problem: LCD displays Er
Possible Causes:
The position feedback wire (black) is not connected.
The coaxial cable is not connected.
The 3 control wires (red, black, blue) are reversed.
Possible Solutions:
Connect the wire*
Connect the cable*
Correct the wire connection*
* The receiver should be power reset after fixing the wire connection.
