Hole in the floor
So I'm attempting to replace the in my mh. I cut a small hole in the sub floor to see if some rot extended beyond what I saw. I didn't realize until it was too late that I had cut through the aluminum...
Forum Discussion
Tin shingles from roofing department. Should be under a buck apiece. Depending on how big of hole you might want to double them up.
Before you cover up hole, after you buy whatever your going to cover up hole with. Depending on where hole is, I would consider making the hole bigger and use it as a inspection port for future use. Maybe big enough to get flashlight inside to get a good look around.
Before you cover up hole, after you buy whatever your going to cover up hole with. Depending on where hole is, I would consider making the hole bigger and use it as a inspection port for future use. Maybe big enough to get flashlight inside to get a good look around.
