Forum Discussion
Gjac
Jul 24, 2014Explorer III
turbojimmy wrote:This is how I do mine also just jack up the front first.
I replaced both calipers on mines a couple of weeks ago and "gravity" bled them. I just open the bleeder valves on the one farthest from the MC. Wait until just fluid comes out with no air bubbles, and repeat on the other side. It works fine. If the pedal isn't returning to normal, I'd look into a possible problem with the master cylinder. If it was allowed to drain empty while replacing the line, it might need bench-bled.
About Motorhome Group
38,756 PostsLatest Activity: Oct 11, 2025