Install rear view system

roachcoach wrote:
I want to install a rear view camera system and was wanting to get some advice from someone who has done this upgrade. I have a class a motor home with a camera in the rear. There are wires there where the camera is and but what is the easiest way to run the wires?

If you're only installing one camera on the rear, just reuse the old cable unless it's defective. You can cut the ends off and solder new connectors (or just solder direct if you don't mind cutting wires if you ever have to change the camera).

If you have to run new wire, run it down the rear cap, forward along the chassis rails, and back up into the cab area is the easiest way to run new wire.

It's not very hard but you do have to work under the coach to run the new wire.

Fred