Is grease/lubrication a DIY on your rig?
If you DIY the grease points on your rig, chime in. I have a 2000 Ford E 450 and an considering DIY. How many grease points? Where? Tips on buying a grease gun and grease. All input appreciated. T...
Forum Discussion
Mike,
I am the owner/custodian/curator of a 40+yo MH with 14 grease fittings that get a hit about every 3k miles. I have gone two or more falls with every grease gun imaginable.
My final choice because it was the only reliable one was a Lincoln 1133. This is a flexible snout pistol grip kind. It can get at everything.
The grease that just about everybody in our crowd has settled on is Valvoline Syn-power. It isn't cheap, but it is much less expensive than replacing parts.
Good Luck and Safe Travel
Matt
I am the owner/custodian/curator of a 40+yo MH with 14 grease fittings that get a hit about every 3k miles. I have gone two or more falls with every grease gun imaginable.
My final choice because it was the only reliable one was a Lincoln 1133. This is a flexible snout pistol grip kind. It can get at everything.
The grease that just about everybody in our crowd has settled on is Valvoline Syn-power. It isn't cheap, but it is much less expensive than replacing parts.
Good Luck and Safe Travel
Matt
