Knock Down Bed
For a variety of reasons, we went with the smaller RV knowing we'd have to solve for "one extra bed". I built this knock-down bed that rides above the dinette. It's "almost twin sized" so there's en...
Forum Discussion
Thanks - those are the ones. There are some reviewers that complained they came with no instructions, and that's true. Take two scrap pieces of plywood and good around until you get the hang of the mounting.
The screw needs clearance in the mating piece, as it drives up and into the bracket. I used a forstner bit to drill out 1/4" of material and provide clearance for the screw.
The screw needs clearance in the mating piece, as it drives up and into the bracket. I used a forstner bit to drill out 1/4" of material and provide clearance for the screw.
