Kohlar 5CKM21 genset not getting fuel
Genset runs fine when I draw from a gal can of gas but will not run when hooked up to the main tank. I thought the main hose might have a pin hole in it but when I use a hand pump on the line it will ...
Forum Discussion
Brian in Michigan wrote:I don't have a fuel pressure gauge but it will pump a good stream from a can of gas.Gjac wrote:Brian in Michigan wrote:The pump is rated for 6-9 psi.
Do you know what the pressure is on the output of the pump?
But is it putting out the 6-9psi? Have you put a gauge on it?
