Koni FSD shocks installed (updates)
My coach is an 09 Itasca Cambria,30ft. E-450 chassis. Had my Koni's installed yesterday .On the drive home about 7miles I noticed an immediate lack of banging when I drove over RR tracks and expa...
Forum Discussion
So I went this morning and had the coach weighed. 3980 on the front axles, 9300 on the rear total weight 13,280. Full fuel and water. Using the Michelin inflation guide I adjusted the front axle pressure to 55
and left the rears at 75. Coming home there was a noticeable improvement in the ride. The previous banging over even small expansion joints is gone. The coach leans less on turns and returns to level without
the rocking motion. Leaving for Mt. St Helens Thursday so I will report after driving up I-5 to Sacrament on our first days journey. Last month I made a trip to Sonoma and the I-5 would knock your teeth out.
Weighed without the toad, and it will be staying home this trip.
Both door stickers say to inflate front at 75 and rears at 80.
