Kwikee Step Motor Replacement

No, my motor is original to the MH at 25 years old, had to repair control board, reinforced broken linkage, replace missing screws that attach steps to MH, repaired rusted through step areas, reset mag switch but have never had to touch the motor.

We got a 2004 Winnebago when it was 10 years old. It came with all the maintenance and repair records and the step was never worked on. They didn't go all the way in, almost but not quite. A little bending where it was binding and a little lube and it seems OK so far.

Our 96 Southwind has the original steps/motor. I keep the joints clean and lubricated.

As others have suggested - step motors usually last a LONG time. Is the motor dead or have the gears busted? Is the step installed correctly? Do you have binding issues? You can remove a cotter pin and bar which which connects linkage between step/motor .. that way you can manually open the step and determine whether it moves smoothly.

We had a 12-yr-old Coachmen, and the step motor died. I replaced the motor with a Taurus power window motor, and the added torque finish stripping the gears in the gearbox. Replaced with a new integrated motor-gearbox and fixed the problem. BTW - the power input quill in the old gearbox was stripped smooth..

The steps still go out smoothly but stutter on the way in and don't quite make it all the way in. The same thing they did twice before, both times replacing the motor resolved the problem.

Grease is the best cure!

I’ve replaced the step motor twice now on our 2012 Georgetown. It has LCI steps.

Replaced it first time a few years ago. Replaced it second time just last week.

I’m finding, that electric motors outside, exposed to the elements on these RVs, don’t have a very long life. Step motor replaced twice, awning motor been replaced once, and now motor that runs leveling jacks has quit (just got replacement motor for it the other day, haven’t put it in yet).

Bottom line, if you gonna own a Motorhome, you better be able to make at least some repairs like this yourself, or have very deep pockets.

The ACI motor was the best one I had in my 1990 Bounder. The one in the Winnie is doing fine.

I had a 97 Winnebago Luxor and at around 15 years had to replace motor with power window motor. Sold it 3 years ago and it was doing fine. Had the new to me Monaco about a year and had to replace it also. Its to cheap, $35-$40, and 1/2 hour. Wish everything was that easy.