Kwikee Steps parts
Hi All, It has been a while for me to post. My old lady finally is giving me a little problem. My Kwikee Steps are not moving either in or out. I traced the problem to be the control unit. I w...
Forum Discussion
gonzo71 wrote:Artum Snowbird wrote:
There is a lot of combined Kwikee help on here. What makes you think it is the control unit?
In my case, the steps would not move. I put my meter onto the motor leads and saw the unmistakable pulse from the control unit, then because they were unable to move, the control unit would trip off internally to avoid an overload.
When I released the bolts slightly that were holding the unit tight to the frame, that gave a little more clearance and presto, it worked. I put some shims under the bolts and never had another problem with it.
I did a full trouble shooting thing unless I am missing something its the box. Also I can move the steps without a problem if I power the motor direct from a 12V battery
Sounds like you know what you're doing and most sure you checked for power going into the controller.
Try Amazon for this or a like control unit and where many get the drive gear and motor from.
