Leveling Blocks???
Being Class A newbies we would like to know what everyone uses for their leveling blocks? My hubby bought and cut some 2x10's to length but these seem very cumbersome! Any feedback is greatly apprec...
Forum Discussion
For me wood was way too heavy and bulky. I had 4 to 5 sets of 10 Lynx blocks. At 8 inches wide they were plenty large enough for my 19.5 inch tires. I have seen them used many times with 22.5 inch tires also. You do have to use a set-up for each dual of course.
I would break one from time to time and considered that a cost of travel.
Towards the end of my full timing, I got older, grouchier, and much less tolerant of sites that my hydraulic levelers couldn't handle and I didn't need nearly as many sets of Lynx blocks.
This is what they look like HERE
If you were to store an RV for a month sitting on them for more I would recommend using the "Lynx Caps"
I would break one from time to time and considered that a cost of travel.
Towards the end of my full timing, I got older, grouchier, and much less tolerant of sites that my hydraulic levelers couldn't handle and I didn't need nearly as many sets of Lynx blocks.
This is what they look like HERE
If you were to store an RV for a month sitting on them for more I would recommend using the "Lynx Caps"
