Leveling motor home in driveway
First of all, sorry if my signature still shows our old fifth wheel. We got our Georgetown a week ago and haven’t changed the signature yet. My driveway is not exactly level so we can get rain run...
Forum Discussion
These ramps work well for me. The highest wheel uses one layer of 3/4" treated plywood. The other three have a bottom layer of 3/4" treated plywood to which are screwed treated 2x's cut to the appropriate width and bolted together on edge with 1/2" all-thread rods. All three ramps are different heights to provide a finished level elevation. I also use short timbers under the jack pads to within about 1/2" so that I can tune up level while keeping the chassis at ride height to improve maintenance accessibilty.
http://i258.photobucket.com/albums/hh275/richnewcome/DSC_0046.jpg
http://i258.photobucket.com/albums/hh275/richnewcome/DSC_0046.jpg
