Forum Discussion

spotrot's avatar
spotrot
Explorer
Apr 24, 2021

lock/latch for rear compartment door - need source

Winnie (per Lichtsinn) says the lock/latch for rear compartment door is no longer available. It's a simple lock assembly that turns 90 degrees and has threads on the inner end for attaching the lever that holds the door shut.

Anyone have a idea regarding source for this? I'd sure prefer not to fabricate one.

2008 Itasca

I have photos but it appears they need a URL
  • This is one of the best forums I've ever seen. The knowledge and helpfulness of the members make it great. I hope some of my entries have helped others too.

    Here are a couple pics:




  • LouLawrence wrote:
    Let's see a picture. No site is easier than this one to post a photo. See the DIY topic for instructions.


    You are 100% correct that a picture should be shown.

    You are 100% wrong that no website is easier than this one to post a photo.

    The well designed website allow you to just click on a photo from your pc. Self explanatory and takes just a few seconds.

    I'm already 20 minutes into this but think I have it now. This multi-step process is about as efficient as dial-up :)
  • spotrot wrote:
    Winnie (per Lichtsinn) says the lock/latch for rear compartment door is no longer available. It's a simple lock assembly that turns 90 degrees and has threads on the inner end for attaching the lever that holds the door shut.

    Anyone have a idea regarding source for this? I'd sure prefer not to fabricate one.

    2008 Itasca

    I have photos but it appears they need a URL


    spotrot
    https://tinyurl.com/57updcy
  • Let's see a picture. No site is easier than this one to post a photo. See the DIY topic for instructions.
  • Thanks for the suggestion. I'll call around locally.

    I forgot to mention it had a black thump/knob around the lock cylinder.

    There are many to choose from ithout the knob.
  • Have you checked with your local, independent RV dealer or service center? A lot of the smaller, family owned, shops have drawers, racks, and cabinets full of parts for older RVs and applications. A lot of these places scavenge old rigs for parts, strip good parts off from broken objects and store them for later use.