Lost hub cap

Thx Pete.

These "so called" truck stops" with one exception won't even fit a truck, believe me, and none that I know actually carry truck accessories. Good web site though, don't think I have that one handy.

Lar's wrote:
It's the front wheel, 5 slot, dome shape, stainless.

No truck stops within at least 200 miles so guess I might be looking online.

Thx for the suggestions.

If your city in your side bar is right. Theres 19 fuel stops near you.
Fuel/ Truck stops
Pilots should have the normal ones. Wish they had the 19.5 ones for mine. Need only one and looks like I will have to buy a full set to get that one.
Pete

I actually have lost 2 hubcaps from the same wheel and bought replacement caps with Spartan logo from RV Chassis Parts. Last time before I snapped the new hubcap on, I put 3 dabs of clear silicon paste/adhesive on the backside of the hubcap. It's been 2 years now and I haven't lost the cap again.

It's the front wheel, 5 slot, dome shape, stainless.

No truck stops within at least 200 miles so guess I might be looking online.

Thx for the suggestions.

I just replaced one on a 22.5 Alcoa wheel. Here's the place. http://www.phoenixusa.com/

I just went through this...I learned there are several different styles. There are 4 clip, 6 clip etc. Plus there are deep or narrow ones. Make sure you get the right one or it won't fit. After buying several wrong ones, I called Monaco and they sent me the right one. I installed it today, perfect fit. I was also able to get the roadmaster logo sticker from the same phone call. Good luck. Tommy

accsys wrote:
As others have said, the plain hub covers are available at many truck stops. If you have a Freightliner and want a hub with the logo, they are available at Freightliner shops, just call ahead with VIN and check availability.

That's what I did when I lost one. Freightliner had one for me the next day. And it's the right factory one not a cheap imported copy.

Are you talking about the steer wheel which has a simple snap on cap??

The rear drive covers are held on to a bracket which allows the logo to be screwed into. I have seen broken welds on the (rear) bracket and the cover was missing.??

Kerry

If used is ok try Colaws RV salvage.

As others have said, the plain hub covers are available at many truck stops. If you have a Freightliner and want a hub with the logo, they are available at Freightliner shops, just call ahead with VIN and check availability.