Forum Discussion
hooligan
Jun 10, 2014Explorer
Engine will not shutoff at the switch.
My manual indicates the set control start/stop switch (S1) is faulty.
Moving the switch to "stop" grounds 2 resistors, in the control circuit, which shuts off fuel and ignition.
Early models with "Spec A" designation, the shutdown is controlled by relay K5 on the control board.
My manual indicates the set control start/stop switch (S1) is faulty.
Moving the switch to "stop" grounds 2 resistors, in the control circuit, which shuts off fuel and ignition.
Early models with "Spec A" designation, the shutdown is controlled by relay K5 on the control board.
About Motorhome Group
38,705 PostsLatest Activity: Jan 24, 2025