Muffin fans- fridge issues- blew a fuse
Finally getting around to installing the fans I had ordered from ALLELECTRONICS. Things going good just up and down the ladder more times then not;) Ran the wires down from the top and tested to ...
Forum Discussion
Got it!
I made an aluminum housing for mine. The picture shows two fans ea @ 60cfm. I went back to the drawing board and mounted four ea @ 130cfm. I made the housing out of a piece of 3/4 angle aluminum from Home Depot.
I then removed the plastic housing that covered the chimney and mounted the fan bracket inside the chimney itself. Reinstalled the plastic housing and the vent cover. My project over the winter will be to remove the covers and insulate the fan bracket....Dennis
I made an aluminum housing for mine. The picture shows two fans ea @ 60cfm. I went back to the drawing board and mounted four ea @ 130cfm. I made the housing out of a piece of 3/4 angle aluminum from Home Depot.
I then removed the plastic housing that covered the chimney and mounted the fan bracket inside the chimney itself. Reinstalled the plastic housing and the vent cover. My project over the winter will be to remove the covers and insulate the fan bracket....Dennis
