Need Help and Experience (Update)
I have an 2008 Monaco Dynasty motorhome..... the cruise control and the windshield wipers have stopped working. I have checked all of the fuses and everything I know how to check. Everything looks ok....
Forum Discussion
This is an update to my original post.....
Today I went to my storage facility to get my coach, to bring it home so I could better work on it. When I got out on the highway I, just for kicks, I hit the Cruise Control..... and lo and behold it worked. With this under my belt I hit the windshield wipers..... and lo and behold they worked. I played around with both switches on the way home and they both worked normally...... go figure and a big question mark.
I can offer no explanation with the exception that the SmartWheel Control System may have somehow rebooted itself from the "SmartWheel Steering Wheel Control System. (I'm guessing and grasping here.)
What I am worried about is that if it happened once, it can happen again (when it's raining "cats n dogs"). I may go ahead and pull the SmartWheel apart and spray the boards down with a contact cleaner (as Dennis suggested).
If anyone has any other suggestions, please jump in..... and thanks for all of your previous input.
I hope this update gets put back on top of this blog.
becker
Today I went to my storage facility to get my coach, to bring it home so I could better work on it. When I got out on the highway I, just for kicks, I hit the Cruise Control..... and lo and behold it worked. With this under my belt I hit the windshield wipers..... and lo and behold they worked. I played around with both switches on the way home and they both worked normally...... go figure and a big question mark.
I can offer no explanation with the exception that the SmartWheel Control System may have somehow rebooted itself from the "SmartWheel Steering Wheel Control System. (I'm guessing and grasping here.)
What I am worried about is that if it happened once, it can happen again (when it's raining "cats n dogs"). I may go ahead and pull the SmartWheel apart and spray the boards down with a contact cleaner (as Dennis suggested).
If anyone has any other suggestions, please jump in..... and thanks for all of your previous input.
I hope this update gets put back on top of this blog.
becker
