Forum Discussion

23hotrodr's avatar
23hotrodr
Explorer
Mar 12, 2020

No power to center pin of 7 pin trailer connector on Winne

I have a 2007 Itasca SunCruiser 35L. There is no power to the center pin of the 7 pin trailer connector, but does have a 14 ga wire connected to that pin. I have never tested this pin previously for p...
Class A
opnspaces's avatar
opnspaces
Navigator III
Mar 13, 2020
Yes you should have 12v at the top right blade (1 o'clock position) when looking into the socket. I would get a meter or test light and check there before rewiring anything. Depending on the wiring you might have to have the ignition on or add a fuse to energize the blade.

About Motorhome Group

38,766 PostsLatest Activity: Jan 10, 2026