Convenience Center Switches
Where can I find a replacement for this exact switch board. I looked at the manufactures website and they dont seem to list them. I did a google search and cant find it. Ebay has a few, but not the same layout as mine.
Forum Discussion
- AT-MSP-117
This one is close......might work - Someone good at soldering could mount a momentary push button into the blank slide2 switch spot below and wire it up to replace the burned out membrane aux button. It wouldn’t be perfect but better than a completely wrong board.
- odds are it is a KIB circuit board. What you can do is search for a KIB panel that has the similar button tank readings. If you find one that has 2 Aux tanks, it will probably fit you just will not use the 2nd tank. Doug
- If you look at the AUX button, youll notice its bubbled out. It burned up. So the whole board is bad now. Technically the all the rocker switches are still good. I looked at American Technology Components website. They dont list any boards, just individual switches. Ill look up the other sites mentioned, thanks.
- I think those are made in batches per the RV manufacturers specs at the time and once the production run is gone, they're gone.
- when all else fails try Colaw RV Salvage.
- The rocker switches should be replaceable. The little membrane switches and lights are probably circuit board mounted and a specially manufactured item, maybe obsolete if an older RV. I would call American Technology Components.
- https://www.atcomp.com/
If you are talking about the monitor panel. Rarely do they go bad. It is usually a sensor or wiring fault. All other parts on the panel can be found easily. switches may not be same color but you can find them in red or orange. Doug - If you need switches, JR RV products have them.
Have you contacted American Technology Components?
