Norcold 682IM not cooling
I turned my 20 year old Norcold refer on Mon on electric it cooled down to 40 degrees over night on the setting of 3(1-5), but later rose to 50 degrees. I raised the setting to 5 which is the max whic...
Forum Discussion
Gjac wrote:
Thanks Doug, if I remove it from the fins and let it hang, will that have the same effect as turning the refer to the max setting of 5? Also I see nowhere to disconnect thermistor inside the refer does this have to be disconnected from the board in the outside compartment? If I understand your post, if I disconnect it and it works(cools properly) the thermistor is bad if it fails to cool with the thermistor disconnected does this point to a bad control board?
Never seen a control board affect the cold operation. Of course I have only worked on RV refers for 37 years:B Letting it hang will cause it to work and cool 24/7. Doug
