Norcold 8310EG2
Yes, it's 30-years old. But it works. Sort of. It works fine on propane. GAS light comes on, CHECK lights up briefly until it lights. It gets as cold as I would expect and RV fridge to get. When I ...
Forum Discussion
Old-Biscuit wrote:
OK......heater working. Underwear needs changing........:B
AC light on eyebrow.Cold be bad connection between power supply board and eyebrow, bad cable or eyebrow bad.
Yep. I looked at it again. AC terminals are J5 and J6, which is what I *thought* I checked. Might have had the multimeter hooked up incorrectly. Not sure.
In any event, the coolant is circulating - I can hear it. Freezer is getting cold. Fridge usually takes a bit longer. I'm going to call it "working" for now. That non-functioning indicator light is going to bug me though. I'll add it to the "to do" list.
EDIT for those following along at home. J5 and J6 are the correct terminals to check on the 8310 for the AC heater. You have to have your multimeter set on AC, not DC. Oops.
