Onan genset, overheat after coolant change
I just did a cooling system drain, flush and refill on my 10KW Onan generator. I followed the procedure in the manual precisely. I was also able to get all of the required 6 guarts of new coolant ba...
Forum Discussion
Were you running it with the cover still off?
If so, it will overheat because the fan will not push enough air through the radiator.
If so, put it all back together and try again. I bet you'll be fine.
I found this out the hard way myself....
If so, it will overheat because the fan will not push enough air through the radiator.
If so, put it all back together and try again. I bet you'll be fine.
I found this out the hard way myself....
