Onan Micro 4000 Generator Won't Start
Generator was working fine, but I turned it off and now it won't start. Seems like a low battery, but they're full. Almost thinking a wire fell off, but don't see anything obvious. The lights on th...
Forum Discussion
txnese wrote:
I have a voltmeter on the battery and voltage stays about 12v during starter.
If that really means "during the time the starter is trying to run", then it indicates that there is a bad connection between the battery and starter. That might include the contacts in the solenoid.
The voltage at the starter should be within a couple of tenths of what it is at the battery.
