Only getting 30A indicated on 50A connection
I recently bought a 2009 Bounder 35H, it has 50A service via an Intellitec Smart EMS, model 900. I had my electrician (licensed, bonded, experienced, has been doing work for my family for many yea...
Forum Discussion
enblethen wrote:
The OP tested the cord. It is not getting the correct voltage so the problem is outside the rig.
Readings indicate to me, without taking them myself, indicates a problem with the neutral and or ground. My take is the ground and neutral could be reversed in the receptacle.
In the electrical panel at the house where the 50A shore power recepticle is aren't the ground and neutral tied together inside the panel?
