p30 front caliper removal
Need to remove the front calipers on a chevy/workhorse 2000 p30 chassis. removed the set screw so now what do I do. Is there a plate holding the caliper on. Do I have to remove it? If so how? Or does ...
Forum Discussion
After you get yourself all cleaned up from the brake job and have a cold adult beverage , put your dirty clothes back on, get out your creeper and replace those front brake hoses. I have heard that they tend to break down internally and not allow the brake fluid to return to the master cylinder, thus causing the brake pads to hang up in the applied position. I replaced my hoses while I was replacing the front brake pads and between new pads and new hoses, I have no more brake squeal when coming to a stop. Don.
